The Session-Pro™ Double-Stack Mobile Guitar & Case Shelf Racks
Large Capacity Multi-Guitar & Case Stands For Collectors & Studios
Price range: $1,329 through $1,359
-
- Clear your clutter — store up to 18 guitars or 20 cases without taking up much floor space
- Steel-reinforced rails give strong support for heavy loads
- Choose your ideal shelf setup: guitars only, cases only, or a hybrid mix
- Unique cradle rails keep your guitars secure and steady at all times
- Feel protected with nitrocellulose-safe padding at every contact point
- Heavy-duty wheels with brakes make it easy to roll and lock the rack in place
- Proudly crafted in the USA with top-notch materials you can trust
Highlights
Description
Space-Saving Double-Decker Guitar Shelves to Declutter Your Music Room
Do you have guitars and cases piling up in your home, music classroom, retail shop, or recording studio? Stacking them on the floor or leaning them against the wall creates clutter and makes it hard to grab the right instrument when you need it. This mess can also lead to accidents and makes it tougher to move around your space.
The Session-Pro Double-Stack Mobile Guitar & Case Shelf Racks by A&S Crafted Products fix these problems with a strong, well-built, mobile storage system. Proudly made in the USA, this double-decker rack helps musicians, collectors, studios, shops, and even music classrooms keep things neat and organized while using minimal floor space.
Discover why the Session-Pro Double-Stack is the top pick for moving and storing lots of guitars and cases:
✓ All-in-one Solution for All Your Guitars
This rack can handle most styles of electric and acoustic guitars, solid or hollow bodies, plus basses and banjos too.
✓ Choose the Shelf Setup That Works Best for You
Pick the configuration that matches your needs:
● CASES ONLY – Holds up to 20 cases with steel-reinforced rails for heavy loads. Two pick-shaped “bookends” keep cases standing tall and stable, and vinyl edging protects them from scrapes.
● GUITARS ONLY – Holds up to 18 guitars with special cradles that keep each one secure, even when rolling the rack.
● HYBRID – One shelf holds up to 10 cases, and the other fits up to 9 guitars.
✓ Smooth Mobility with Locking Wheels
Heavy-duty wheels make it simple to roll the rack wherever you need it, and locking brakes keep it steady once you’re set up.
✓ Nitrocellulose Safe Materials for Vintage Instruments
All Session-Pros are nitro safe guitar stands. Every instrument contact point is covered with non-reactive felt. Many cheap stands use rubber or other materials that can damage delicate vintage guitars. Ours never will.
✓ Proudly American Made
Each Session-Pro Double-Stack is handcrafted in the USA with durable black laminate sides, stylish chrome-look edges, “F”-hole cutouts, and strong birch cross-rails with extra bracing.
✓ Shop Confidently with Our Guarantee
We stand behind our racks. Read about our 100% Money Back Satisfaction Guarantee (click the RETURNS tab above for details).
What Our Customers Are Saying
Real reviews from verified purchases
It is an amazing product. It is my second one, that shows how satisfied I am. Being a collector and wanting to have my instruments safely stored and maintained this is by far the best product in the market.
Photo Gallery
Customer Photo Gallery
Reviews
What Our Customers Are Saying
Real reviews from verified purchases
It is an amazing product. It is my second one, that shows how satisfied I am. Being a collector and wanting to have my instruments safely stored and maintained this is by far the best product in the market.
This stand exceeded my expectations. It is very high quality and holds all of my guitars. It has saved me a lot of space and I can even keep some gear underneath it as well. Highly recommended!
This thing is fantastic! I wasn't able to install the wheels because I need to keep bass/explorer cases on the top shelf and have low ceilings, but I'd still buy it again.
FAQs
A: Plan to leave about 6–12 inches behind the rack to allow the cases to lean properly. This depends on the size and shape of each case and how you position them. For the guitar-only version, expect about 4–8 inches of clearance depending on the size of your guitars.
A: Each case rail shelf can hold about 10 cases. You might squeeze in more, but for heavy electrics we don’t recommend overloading them to avoid bowing.
A: The Session-Pro Double-Stack is made for studios, collectors, and anyone storing high-end or heavier solid-body guitars and cases. It includes extra support brackets and nitro-safe neck holders. The Band Room Double-Stack is better for schools and programs that store lighter guitars and cases.
A: Most electrics and dreadnought acoustics with rounded bottoms will fit well. Guitars with sharp angles like Flying Vs, Firebirds, or Explorers won’t fit.
A: If you have a jumbo, resonator, Dobro, or other non-standard guitar, measure your instrument and compare with these limits:
– Max neck depth (fret-side to back): 1.25 inches
– Max body length: 42 inches
– Max body thickness: 5 inches
A: Yes — the listed height of 71.5 inches includes the wheels.
A: Here’s what we recommend for most cases:
– Dreadnought cases: at least 78–80 inches
– Rectangular cases: at least 86–88 inches
– Dreadnought bass cases: at least 86–88 inches
– Rectangular bass cases: at least 96–98 inches
If needed, removing the wheels gives you about 6 inches of extra clearance.
A: For guitars, plan for:
– Regular guitars: about 76–78 inches
– Regular basses: about 84–86 inches
Removing the wheels gives about 6 inches more room.
A: The rack fits through doorways 80 inches high and 33 inches wide. If you move it fully loaded, add about 6–8 inches to the width for the cases. The height is usually fine unless you have tall bass cases or rectangular cases on top — then you might need up to 86–88 inch clearance.
A: Yes we do! Just reach out to us for details.
A: We include clear instructions and all the hardware you’ll need. It’s a semi-complex build, so having a second person to help makes it much easier.
A: Firebird and Explorer cases should fit fine. Flying V cases may fit if they have a straight side and bottom, but wedge-shaped ones might not sit right.
A: Yes — the wheels are optional and handy if you need to move the rack, but you can use it without them.
A: Yes — both the case-only and hybrid setups work with rectangular cases.
A: It includes a pick-shaped bookend that keeps your cases standing tall and together.
A: Rectangular bass cases can go on the top shelf but not on the bottom shelf.
A: It has black high-pressure laminate sides with a chrome-look trim and strong birch rails.
A: Yes — you can choose to install the guitar cross-rails on the top or bottom, whichever works best for you.
A: To load, guide the neck into the slot and lower the body into the cradle. To unload, lift the body up first so the neck clears and pull it out.
A: Yes, you can. Contact us anytime if you’d like to switch to a different setup.
Shipping
To Calculate Shipping: Click the “Add to Cart” button.
Delivery Timeframe: Your order should depart from our warehouse in 2-5 business days and is sent via UPS or FedEx Ground. A tracking number will be emailed to you directly from the shipping carrier as soon as the shipment is en-route.
Payment Processing: We will not charge your credit card until the item is ready to ship.
Returns
RE: MISSING PARTS - If a product arrives and parts are missing, please email us within the first 15 days of your delivery date. We will ship your replacement parts within 5 business days of receiving your message.
RE: DAMAGED RETURNS - If a product arrives damaged, please email us photos (required) of the damaged component and the box in which it was shipped and notify us immediately (i.e., within the first 15 days of your delivery date). We will ship to you replacement(s) for the damaged part(s) and issue a return shipping label for the damaged parts (if we require the damaged parts to be returned).
RE: NON-DAMAGED RETURNS - We take pride in our craftsmanship, but if you’re not completely satisfied with your purchase for any reason, you may return it for a full refund (minus the initial shipping cost and return shipping cost). We must be notified via email within the first 30 days of your delivery date. All returns must arrive at our receiving location in perfect, unused, and resellable condition. Please notify us via e-mail as to the reason for the return as well as your name, address, order number and name of product purchased. We will then contact you with a Return Authorization # and instructions on where and how to make the return. IMPORTANT: Please keep all original packaging to make the return.
NOTE: Please allow 15 business days from the time the item is returned to process a refund. Credit card refunds may not appear until the following billing cycle.
You may also like…
-
Sale!
The Session-Pro™ Mobile Guitar Rack
Heavy-Duty Mobile Guitar Stand. Ideal for Stage or Studio.Price range: $419 through $489 View Details This product has multiple variants. The options may be chosen on the product page -
Sale!
The Studio™ Deluxe Guitar Case Storage Rack
Multiple Sizes & Finishes Available. Features Imported Herringbone Inlays.Price range: $395 through $415 View Details This product has multiple variants. The options may be chosen on the product page -
The Studio™ Standard Guitar Case Stand
Attractive Solutions to De-Clutter Your Space In Style, Plus Optional Wheel-KitsPrice range: $445 through $490 View Details This product has multiple variants. The options may be chosen on the product page -
The Studio™ Harmony Guitar Case Stand
Stylish, Modern & Space-Saving Guitar Case Storage RacksPrice range: $519 through $579 View Details This product has multiple variants. The options may be chosen on the product page -
The VersaRack™ Multi Guitar & Case Stand
A Stylish, Budget-Friendly Solution That Adapts to Hold 6 Guitars, 6 Cases or HybridPrice range: $244 through $289 View Details This product has multiple variants. The options may be chosen on the product page -
Sale!
The Session™ Deluxe Multiple Guitar Stand
Luxurious Wooden Stand with Herringbone Inlays & 5 or 7 Capacity OptionsPrice range: $375 through $398 View Details This product has multiple variants. The options may be chosen on the product page -
The Carousel™ Deluxe Rotating Multi Guitar Stand
Innovative & Decorative Stand to Hold Maximum Guitars In Minimum SpacePrice range: $1,139 through $2,098 View Details This product has multiple variants. The options may be chosen on the product page -
The ShowCase™ Deluxe Guitar Display Case
Luxurious Display Cabinet for Acoustics & Electrics, with L.E.D. Lighting and Humidity Control SystemPrice range: $1,298 through $1,398 View Details This product has multiple variants. The options may be chosen on the product page
Awesome !! This saves a lot of space and looks great !
Tom T. –
This does the job ! Thanks !
Tom T. –
All I can say is WoW. The Session-Pro™ Double-Stack is such an awesome product from ordering, to building, and finally using. It’s super sturdy, has a studio vibe, and the wheels that make it real smooth and easy to move it if you have to. I was a little worried about the assembly process from reading about all the difficulty’s some seemed to have via the reviews. Well let me tell you something, it was practically a piece of cake. The trick is to follow the instructions and build the unit on its face. That way the inserts are never falling out because gravity is holding them in for you. I got every single screw and insert nut started, then went through real quickly and tightened them all up with a Ryobi Screw Gun with an Alan Wrench tip.
Thanks!
Rick C. –
I’m very happy with my purchase, so much so I bought this one which my second one. It is made of very high quality materials and is very sturdy as it should be to in order keep and hold my valuable guitars. It really is a great space saver when you have as many guitars as I do.
I do have some constructive criticisms to offer to make your great product even easier to put together.
The main area where I feel that the product needs some improvement is related to the building of the rack, specifically the provided metal barrel nuts.
The company should consider pre-installing the metal barrel nuts into the rails and braces because as it is now they tend to get out of alignment or fall out of the pre-drilled hold in the rails and braces when you are trying to build the rack. It makes it unnecessarily very difficult to get the hex screws to catch firmly in the barrel nut without cross threading. Often the barrel nuts just plain fall out of the pre-drilled holes before you can get the hex screw to attach.
This is especially true of the braces in which the holes to insert the barrel nuts are drilled at angle. This is because gravity causes the barrel nut to shift out of position very easily when trying to install them thereby making it very nearly impossible for them to install correctly on the first try.
It took us roughly twice as long to install the four braces than it did to install the rack rails. It was a very frustrating experience because every time we tried to tighten the hex screw it the nut would slip and get out of alignment or just plain fall out. Using a screw driver to try to keep the barrel nut in place is not a real solution because you can’t see whether it’s aligned properly when trying to screw it down..
The only other thing that I would suggest to make the installation go easier is to include a longer hex wrench with a plastic handle like a screw driver. The small wrench that is included is very hard on your hands and hard to keep turning which resulted in a couple busted knuckles.
With all that being said, I believe if you make some of these changes you would end up making an already great product even better.
I love the end result even if I did find the construction to be a bit frustrating.
Steve S. –
Steve, thanks for your feedback. We always welcome constructive feedback as that’s very important to us and helps us to make what we think is a great product even better. We are aware that on some of the rails, because of the angle they sit at during assembly, the barrel nuts can slip making it more difficult for assemble those rails. Though we’ve sold a huge number of these over the years and everyone seems to be able to get it assembled, we have experienced some frustration ourselves and are currently working on a solution that might help with those more difficult rails. We haven’t run across any particular problems with the braces but again, are appreciative for your feedback. Hope you enjoy the rack for years to come.
GuitarStorage –
The wall guitar case rolling shelf is strong and well made. My husband loves his unit. I love that it has organized his music room and added usable floor space for jam sessions.
Linda W. –
EXCELLENT product. Took care of having all of my guitars in one place
Carl C. –
very nice rack! good quality and easy to assemble.
Henry B. –
Top notch quality. Just what I needed to get all of my guitars organized.
Carl C. –
Getting a rack or stands for guitars is easy, but what about the cases? It’s a big problem if you don’t have the space for them. Luckily, I came across Guitar Storage and their rack for guitar cases. It was the perfect answer to my problem! Set it up in my garage and can move when needed thanks to the wheels. Highly recommend!
Robert S. –
I was in need of something to put my guitars in one place. I was considering putting them on the wall but it didn’t seem practical. When I came across Guitar Storage and saw the Guitar Shelf Rack, I knew I had found the answer I was looking for! It fits all my guitars and looks great. Highly recommend!
Robert S. –
This storage solution is awesome. Incredible quality and perfect solution for storage.
Serdar A. –
This is the most perfect stand! All the guitars fit securely and do NOT move, even when the stand is wheeled (yes – it has wheels!) to a new location! It was reasonably easy for one person to put together, but I had a little help from my 11-year-old to start off, then finished the task myself. It looks great but more importantly does the job well, hands-down.
Miles M. –
Way to giant for my space. Really well made but I have to get rid of it. Just too big for my space unfortunately. Just a real disappointment.
Jeffrey M. –
Amazingly stores 18 guitars in a confined space. Very sturdy. Looks nice. The wheels are excellent, not sure if I would make all four wheels the locking type instead of two, but it feels secure with two. Assembled securely, and hardware is good quality nothing stripped out, etc. Perfetc height overall for moving around from room to room when necessary or for cleaning. Actually has space behind it for storage, but I like the clean look. Thank you. I am impressed and my guitars are accessible so I will play more often.
Dave M. –
An excellent product, I’m delighted with it. I’m also very pleased with the superb customer service provided by Guitar Storage–immediate and courtesy response to my inquiries.
Tom V. –
Hey guys I absolutely love my guitar rack. It was no picnic to put together but well worth it. Thank you.
Jeff A. –
Purchased based on the single-tier rack that I’ve used for years. Well built and packed; providing extra hardware was a nice touch (although not needed). It can be assembled and moved alone, although it takes some balancing. Very large for a family room (the family says it “looms”…but it’s also been the band practice area for years, so they like not having cases strewn about). It gets the job done with space for 12 “thinner” electric cases (Strat, Les Paul, Casino, Ibanez solid body, Ric, etc.) per tier. Basses *can* fit in the top rack (and Dreadnought-shaped bass cases even fit on the lower one), but they fit better in the single-tier models–they don’t protrude as far out the back in the latter. Lifting cases up to the second tier can be a chore if one has a bad back or shoulder, but that’s just the nature of a two-tier system. Saved a ton of floor space!
Chris M. –
Disappointed it will not set directly on the wall.
Dennis m. –
So far this thing is fantastic! It is solid as a rock and it’s really nice having all of my guitars in one spot and not spread out all over! I haven’t had it long yet, but it’s well built, I suspect it will hold up well. If I had one complaint I would wish that it didn’t have to sit so far from the wall to accommodate the guitar cases, but it is what it is…
Bart B. –
Love the concept of this and had high hopes, especially for this kind of money – But I was sadly disappointed… Two of the cross-member pieces didn’t have completed holes through them for joining parts AND the holes at the ends of two of them were off and didn’t align with the mating parts without the need for me to drill to fix them. While that was disappointing, I’m handy that way and was able to fix these issues and make it work – BUT the biggest disappointment (and wonder) was the overly excessive angle they chose for the guitars to sit in the rack. It’s so excessive that all of the guitars end up with the headstocks hanging WAY OVER the back of the rack, many by about a foot – This prevents you from being able to have the rack and the guitars flush against a wall, which is what I was expecting – It’s a complete waste of space and very bad design, as the angle is WAY deeper than it needs to be. So, being handy, I also fixed this by re-drilling the holes for the top rail, where the guitar necks rest, so that the rack can then be placed flush to the wall and none of the headstocks stick out past the back of the rack. This IS possible and you can still get the bottom row of guitars in and out easy enough, granted, a bit less room but still completely functional and far better to help this already large rack take up as little space as possible. The other kicker in having to do all of this extra work, just make this thing go together and fit in my space, was that I wasn’t wearing gloves and in handling their metal hex bolts, one of them had a metal splinter that went into my finger. It must of had some terrible bacteria on it because it infected my right pointer finger and within a day got so bad that I had to go to the ER – It was so swollen, extremely painful, and infected that they had to lance it (which that was no fun, especially for a guitarist) – This literally cost me almost $1000 at the ER and then obviously made it impossible for me to play for almost 2 and half weeks!!! It was horrible!!! I’ve never experienced anything like that, so if you do end up buying one of these, be aware of exactly what you’re getting and that if you get one like mine, you’ll need to have some woodworking or at least some “handy” skills to get it together – And most important, PLEASE wear some sort of protective gloves to avoid getting a bad infection from handling the hardware they use. This is a really cool idea and concept, but it really could use some work to make it better… For what they’re charging, they should have far better quality control AND they need to change that crazy radical angle, at least to the point where the guitars aren’t hanging so far over in back. Most would expect to place this flush to a wall IMHO.
Steve M. –
Steve, Thank you for your feedback and we’re very sorry you ran into a problem with the incomplete holes and any other issues. We wish you had reached out to us. We pride ourselves on customer service. There was one other customer that had the same issue around the same time. As soon as he let us know, we immediately rushed out replacement rails to him for which he was very grateful. We found the issue causing the problem with a piece of equipment in the shop and have since corrected the problem. Rest assured that this is a true anomaly. As can be seen by all our positive reviews, while a mistake can happen when you are producing and shipping so many racks, it is a rare event and we do take care of our customers if and when there is a problem.
We’re also not sure where you are placing the guitar necks, guitars and headstocks you referenced as you purchased and were shipped a case rack and not a guitar rack.
As far as the design for the case rack is concerned. If you are placing cases in (and not guitars) you cannot make the cases in the bottom rail sit more upright as you would never be able to get them out. Especially the rectangular cases. The bottom row is the determining factor in how far it should sit next to a wall. If the bottom level was designed to hold cases more upright the rack would exceed the height restrictions of most ceilings and you might need a step stool to reach the top cases to remove them. We’ve spent a lot of time trying to design a bi-level rack that functions. You may have to keep it a few inches from the wall, as is documented on the web page, but you will have functional, aesthetic storage for 20 guitar cases.
We regret the unfortunate injury to your finger. Again. we would have loved to have you contact us so that we could get back from you a sample bolt from your package and then in turn go back to the manufacturer of the bolts, as we have never encountered this issue from a customer. We use the same bolts in multiple products and as well as handling these ourselves have never had anyone bring this up. Probably, tens of thousands of these same bolts have gone out throughout our product line.
Again, we greatly apologize for your poor experience but do welcome the feedback and will keep all these issues in mind going forward.
GuitarStorage –
Perfect for my cases. Very sturdy and well made!
Jay L. –
I purchased the double-stack case-only model and am very pleased with the rack. Assembly does require two people but is pretty straightforward. The construction is solid and I am confident that it will safely hold 22 guitars in cases. Would not hesitate to purchase another rack.
Peter F. –
This thing is huge! Two holes had not been drilled on one of the cross members so I had to drill them. A helpful idea would be to letter or number each part on the end for easy identification. A magic marker would do the trick and make mistakes much less common when assembling. I have 23 guitar cases of mixed size and shape on the rack. those huge Gibson Firebird, Explorer and Fender bass cases do not fit. Love it!
Kenneth B. –
The rack is great. Very sturdy and rolls easily. My only complaint was the difficulty of assembly. We looked on the website and youtube for an assembly video and couldn’t find one. It took us quite a while to construct it. A guiding video would have been helpful.
brian g. –
It is an amazing product. It is my second one, that shows how satisfied I am. Being a collector and wanting to have my instruments safely stored and maintained this is by far the best product in the market.
Sergio S. (verified owner) –
The rack is massive! Storage of this type is needed, so we will live with its size and rearrange the room to accommodate its bulk. It is sturdy, but we did have one issue with one of the cleats where the wheelbase attaches. When the directions say don’t screw too tightly, they mean it. The cleats are very shallow so a tight screw causes the cleat to pop out.
Mitzi L. –
These are terrific. I bought one then ended up getting another. Great product and very sturdy.
stephen a. –
I love this thing! It’s just what I needed to organize my 15 guitars in a corner (instead of all over the room)! I keep all of my guitars in cases, so I got the “all cases” model. It took a little thought to put together (make sure the slats are oriented correctly!) but it really went fine with no problems and I love it! Now my guitars aren’t in piles and when I want to play one I don’t have to go digging through the cases – they’re all accessible!
Drew T. –
Best guitar storage product made. Highly recommend!
Richard R. (verified owner) –
I got the cases only option. This is a quality product. It’s very sturdy and I can tell it will last a lifetime. It will probably hold more than 20 cases.
The only criticism I have is that there should be separate directions for the cases only, guitars only, and hybrid options. That was a bit confusing. And labeling the parts would be nice.
Minor quibbles aside, this is worth the money if you’re a serious collector.
R S. –
This is a heavy, sturdy piece. The storage makes a guitar collection accessible while keeping it safe. It definitely takes two people to assemble it. But it goes together very well. I got the case only version. I’ve bumped the frame a fair amount while finding the optimum angle at which to insert and remove cases. So far it has held up fine.
M M. –
It took some doing to get assembled but once done, it’s beautiful. Everything is sturdy but very easy to move around due to the large wheels.
Frank H. –
I did a lot of research before ordering this. I ordered the hybrid guitar and case storage rack. Item was shipped quickly and i received it in just a few days. One of the sides was cracked so i emailed guitar storage and they responded right away and shipped out a replacement side that day. I have been really happy with the product and with the customer service.
Kevin C. –
This is exactly what we needed. The directions were a bit confusing to start but we eventually figured it out and it looks and works great.
Diane C. –
Diane,
Thank you for the kind words and also for the your thoughts on the directions. If you have time, please feel free to reach out to us and let us know if there were some things in particular that were giving you trouble in the directions that we can change, as we’re always looking to improve and the feedback we get from our customers is the most important way for us to do that.
Thanks again!
GuitarStorage –
Works well, and it was easy to assemble
Joshua E. –
It definitely works well so far. My complaints are that the directions are poor and that one of the black side boards came cracked. Poor quality control
Steven S. –
Steven,
Thank you for your purchase. We’re glad you are enjoying the functionality. We’re sorry to see you encountered a problem with the crack. Having seen the pic you sent, this would never leave our shop like that and is indicative of shipping damage which we’ve seen before from UPS when it’s occasionally mishandled by them. Of course, had we known about it when you unboxed it, we would have been happy to send you a replacement side and would have made a damage claim for the side panel to UPS. We have gotten in touch with you to arrange compensation and hopefully everything will work out to your satisfaction.
Regarding the instructions, if there’s anything specific you can point out to us that we can improve, we always welcome feedback so that we can constantly improve our products.
Thanks again.
GuitarStorage –
Great way to store guitars, good quality & excellent design. Easy to assemble. Highly recommend if you have many guitars to keep safe. I love it!
Gene Y. –
I never knew this existed. Then I saw it on line! It solved all my guitar storage problems.
Ray J. –
Just what our music room needed made with high quality materials , loaded up with 20 guitars no sag anywhere My son and I put it together in a couple hours would definitely recommend
Nick P. –
I got the two tier rack for instruments in cases. The rack is very well made. Sturdy construction. The wheels are large and make it very easy to move around. Very good product.
Lloyd J. –
Wonderful, Perfect, Fabulous, Amazing. Wish I found this stand years ago. The team at guitar storeage is fabulous . I was missing few screws response time was unbelievable quick. Thanks for this great creation.
Jack G. –
Excellent product but only given 4 stars because I was shorted 4 bolts
Craig K. –
Thank you for the feedback. We apologize about the mishap. Because we make so many of these racks, occasionally a miscount may occur and we greatly apologize if that happened to you. But any request for parts are normally shipped out immediately. Hopefully this has already been resolved for you.
GuitarStorage –
Very nice product, well-made, and not difficult to put together (I managed it by myself, but would have been a lot easier with a companion.) A minor issue with the milling on one of the parts was very quickly and efficiently rectified by an extremely responsive staff. High marks for service.
Mark G. –
Love the simplicity of the storage cab. My cases are very happy in their new home.
Thomas M. –
I LOVE my Guitar Rack ! I’m going to add another so I can get my other 24 guitars out of my living room…. great product but the instructions were a little vague in some steps. Overall 5 stars!
Ken A. –
Incredibly well built, sturdy and reasonably easy to assembly – instructions could be improved with an “Ikea like” step by step with illustrations. I’m a collector, bought the first one to test, and will probably by a couple more because now my guitars are finally organized and protected.
Sergio S. –
This review is based on my experience with the Session-Pro Double-Stack Case Rack. The concept is great and I really like having so many cases double stacked in one location, however, I have a number of issues which led to my two-star rating, which are as follows: 1) The back of the the unit can not sit flush against the wall because the headstock/neck portion of the cases protrude requiring up to 36 in of depth versus the 29.5 in on the spec sheet. 2) The back braces on both the top and bottom shelves are not strong enough to support cases leaning against it and have already started to bow. 3) Similarly, the vertical braces on both the top and bottom shelves are not strong enough to support cases sitting on them and have already bowed. 4) Whenever I attempt to roll the unit everything flexes and I feel it may fall collapse – and so I don’t move it. If it weren’t for the size, weight and complexity of disassembling, repacking and shipping I would have requested a return. Instead I chose to add additional cross supports to allow the guitars to sit at less of an angle which allows it so sit closer to the wall. I have also added additional bracing to help correct and prevent further bowing. All of this for home studio use. If this was for commercial use I would have had to return it.
Robert M. –
Robert,
We’re very sorry you experienced a problem with the rack. You should not have. We have not seen this issue come up with other customers. We would have loved for you to contact us so that we could remedy the situation for you, possibly with a new set of cross-rails. It’s possible, as all wood is different, that there was something defective in that particular shipment. That would not have shown up during packing and we have not had other customers have that experience to let us know that a particular batch of wood was causing a problem. Also, by seeing some pictures, it might help us to make sure that other customers don’t experience the same problem. Overloading the rack with more than the recommended 10 cases could also cause this type of problem
The spec sheet only shows the actual product dimensions, which we are required to show. All other pertinent information, including the distance needed from the wall (as well as height restrictions etc) can be found in the FAQS.
GuitarStorage –
I could use a couple more. The only issue is I would have to disassemble to get out of my residence.
Gary M. (verified owner) –
Great product I wish I bought this years ago
Chris D. –
Works perfect. Outstanding quality.
Anthony K. –
This thing is fantastic! I wasn’t able to install the wheels because I need to keep bass/explorer cases on the top shelf and have low ceilings, but I’d still buy it again.
Chris B. (verified owner) –
Aesthetically beautiful, structurally solid, and totally functional. My disorganization problems are finally solved. I highly recommend the pro level rack to everyone.
Avrim T. –
My hybrid rack looks and works as I hoped from the pictures. Impressive, sturdy, and easy to swing around the room if and when needed. One note: if you have a drop ceiling, maybe have the cases on the bottom and the guitars up top. A few of my cases touch the ceiling.
Joseph S. –
Great product. I’ve got two of the racks in my guitar room. Both hold more cases than advertised. These are great products for those of us with a ton of cases and who want their homes and storage areas to be better organized
Mark P. –
Very easy to work with. They took care of a small problem I had with speed and care. The only thing keeping me from a 5 star rating is ease of assembly. It would be much easier and faster if there were part numbers on the ends of the rack bars.
Vic B. –
AB-SO-LU-TE-LY love this guitar case storage. I am now at 18 guitars with some space remaining. Exactly what I needed.
Rand S. –
Well, isn’t this a godsend for a disorganized collector (like me)! It does exactly what I needed it to do: take 20 guitars off the dining room floor and store them solidly and efficiently. Aesthetically, it looks fine, if a tad generic. I’m considering painting the side panels a snazzier color than black, but that’s just me.
It is truly a massive piece and will dominate a smallish room.
How much of the room am I seeing mine take up, then? (Your experience will likely vary a little.) The width is about 66″. With the case protrusions out the the back, the loaded unit needs about 42″ of depth. The tallest instrument on the upper level brings my height requirement to a good 84″. Fitting 10 instruments per level is very easy, but people with physical weakness may find using the upper level difficult.
Building it was initially very frustrating until I realized that the pre-drilled holes for the barrel connectors are TOO LARGE, and the connectors fall out–because all the holes are pointed toward the floor! I don’t build items like this much at all, and I thought I was losing my mind, because my (limited) previous experience with them was that they always fit snugly. Once I recognized that it was about the holes and not me, it was a simple matter to put little wads of paper in the holes after inserting the connectors and then taping them down with masking tape until the screws could be inserted.
Apart from that, putting it together was a snap. I did it solo and had no other issues, although the assembly instructions could be more clearly illustrated (I had to look too often to ensure I was using the right rail in the right place) and narrated. Everything fits together with admirable precision, although prudence does demand that you don’t jam-tighten everything down until the instructions say to do so. Use your guitar cases and amps to elevate and hold up the rails when you install them. You won’t need a second person if you do.
I’ve pointed out a few concerns, so you might wonder why I give it 5 stars. Simply put: I assign the stars after all is said and done. Results are all that matter, and this is a big win for me.
Closing note: I need two of these racks, but only ordered one in order to see how it went: if I was dissatisfied or unable to make a go of building it, I didn’t want to have to return two of them. So this first one was a great success, and once I finished building it, I immediately ordered another.
Price: consider the value of your guitar collection. That’s all you need to do if you’ve read this far and are hesitant to pull the trigger.
Paul O. –
I love my new Guitar Storage case rack. I considered trying to build one, but once I found this case rack I can get 20 of my guitars that are for sale at Southern Cross Guitars on a movable rack. This is my hobby/business that will keep me busy during my retirement. A very good investment either for business or for guitar collections. Couldn’t be happier. My wife and I put it together in about 2.5 hours with minimal tools. Thanks for a great product!!
Clifford P. –
I own a small but very busy guitar repair shop, String Theory Guitar Repair, outside of Nashville TN. Case storage has always been an issue with me literally tripping over cases when I’m slammed with work. This Double Stack Rack has solved all my case and guitar storage problems. I even store my Erlewine Neck Jig in it! It hold lots of cases and guitars and it looks great too!
Thom A. –
Exactly as is shown on the website. This is a sturdy unit that I predict will last years of service. I assembled it solo without too much of a problem. Great finishes and attention to detail. I’m very happy with the product. Love those casters!
Rod A. –
I’ll give 4 stars for the storage system. A 1 for not delivering everything. As I put this together, I realized that there were no cross braces. I contacted the company; they were delivered two weeks later and then I realized they were short of hardware. Very disappointed with not including all parts necessary to assemble. Had this over a month and it’s still not all put together.
Gene P. –
Hi Gene. Thank you for your feedback. We were sorry to hear of the mishap. In this instance, we did fall short of the exceptional service we aim for and you deserve. We’re always working to improve our packing and shipping systems and procedures to ensure proper delivery and there is more work to be done, hence your incident. We hope you enjoy the assembled product and thank you very much for your business.
GuitarStorage –
Beautifully crafted and designed, my rack is the centerpiece of my studio and I trust it with my best guitars. Easy to put together in a few minutes and built to last a lifetime. Thank you!
David B. –
Big fn big!
Casey G. –
What a great storage unit. I collect Ovation guitars and keep them in their cases. This is the perfect solution for storing them off the floor as well as a space for a couple of amps and Cajon’.. Well built and pretty easy to put together with minimal help from a second person. Love it!
Ed M. –
Great stand to store a collection of guitars. Excellent customer service!
Thank you.
Gregory E. (verified owner) –
Super high quality product, relatively straight forward to assemble, looks beautiful in our hallway, clients and staff are loving it!
Matt M. (verified owner) –
This is a really big (tall) unit, and should fit all of our instruments on it. It was not too challenging to assemble. The wheels really help make this maneuverable. The wood pieces seem to be good quality. The black covered mdf sides had a couple minor defects that were cosmetic. We just hid those with black permanent marker. I expect it to last a long time unless people decide to climb on it.
Kelly G. (verified owner) –
This stand exceeded my expectations. It is very high quality and holds all of my guitars. It has saved me a lot of space and I can even keep some gear underneath it as well. Highly recommended!
Aaron S. (verified owner) –
Great Guitar Storage…. showcase my guitar collection beautifully
Christinne H. –
I’ve had my double stack for the case’s only for a while now. First, the quality of the material is excellent. the setup was easy and the system holds my cases out of the way, freeing up room space. I love it.
Donald P. –
I purchased a 20 case guitar storage unit and I was extremely pleased! Nice customer service, the product was sturdy, and pretty easy to put together. Just had to get it all upstairs! Very satisfied with the purchase, and the entire process. I recommend highly.
Becky M. –
Great space saving storage unit. Easy to assemble and I have recommended this to my friends in need
Bill F. –
The rack is extremely well built and super sturdy. You can trust your guitars to it.
When you order you should keep in mind that the rack is quite large and will dominate the room. Make sure the height of your room’s ceiling can accommodate the height of the rack including the heavy duty size wheels.
The owners were very helpful getting a snafu with my bank straightened out even though I placed my order on a weekend.
The customer service that these folks exhibited was nothing short of exemplary. I highly recommend this product.
Steve S. –
Outstanding rack. A bit much to put together without help and will not roll through normal home doorways, so built to stay in my in-home music room. Would be nice if there was simple breakdown to reduce width for moving
Doug T. –
Great unit, looks great, sturdy and easy to assemble. Great people to work with.
Scott O. (verified owner) –